High Mast Diesel Forklift Maintenance off road rough terrain forklift

Must adhere to the principle of prevention,All Terrain Forklift maintenance usually will be in the end, rough terrain fork lifts can effectively prevent the occurrence of the problem before forklift truck maintenance. So to maintenance institutionalized, standardized and scientific efforts to improve the efficient use of forklift trucks. Maintenance divided run-in period and maintenance, forklift routine maintenance,

off road forklift trucks

 seasonal maintenance, storage maintenance and regular care and other five. Today with the running of maintenance based.
Forklift new factory or overhauled within the time prescribed running-job use, known as forklifts run-in period. Internal combustion forklifts run-in period of work is characterized by: Parts machined surface is rough, poor lubrication, increased wear,battery operated forklifts easy to loose fasteners, provisions must be run-in period for maintenance and use in accordance with the internal combustion forklifts.
Run-in period of internal combustion forklifts: Start with 50-hour break-in period.
Run-in period, three tons of internal combustion forklifts from the weight must not exceed 600kg, lifting height is generally not higher than 2m. Speed ??of the engine shall be high speed, speed limiting device shall be adjusted or removed, the speed should be maintained at 12km / h or less. In accordance with the proper use of fuel and lubricants. The right to correct start driving and operating the engine warm-up to more than 40 degrees in order to start; started to have a smooth, until the temperature to normal after an upshift; suitable shift, avoid crashing; choose a good road; try to avoid the emergency brake; Use close attention to the process of transmission, drive axle, wheel wheelchair, brake drum temperature; when loading and unloading operations, strictly abide by the rules.

Wheel Driving Diesel Forklift steering angle and steering systems for each component connections

 check the adjustment of the clutch and brake pedal free travel and parking brake lever stroke operation, inspection braking performance brakes, YTO forklift check and adjust V-belt tightness, battery powered forklifts check the battery electrolyte level, density and load voltage, check the engine oil, gear oil, hydraulic oil, coolant fluid levels, check the instruments, lighting, signal , switch button and vehicle accessory equipment operating conditions, check the hydraulic system distribution valve lever travel and work tank trip, check and adjust the tightness of lifting chain, electric forklift truck check the door frame, fork work. Prime mover is the engine of internal combustion forklifts, high engine speed, low torque, and can not be reversed. The forklift when the job requires a lower speed, and to constantly changing direction of travel, wheels also have a large torque, for between the prime mover and a drive wheel, a set of prime mover can reduce speed and increase torque and steering means for converting the drive wheels, called the transmission. Internal combustion forklifts transmission mode is generally divided into three kinds, namely, mechanical, hydraulic and hydrostatic type.

High Mast Diesel Forklift Maintenance off road rough terrain forklift

Must adhere to the principle of prevention,All Terrain Forklift maintenance usually will be in the end,rough terrain trucks can effectively prevent the occurrence of the problem before forklift truck maintenance. So to maintenance institutionalized, standardized and scientific efforts to improve the efficient use of forklift trucks. Maintenance divided run-in period and maintenance, forklift routine maintenance,

battery operated forklifts

 seasonal maintenance, storage maintenance and regular care and other five. Today with the running of maintenance based.
Forklift new factory or overhauled within the time prescribed running-job use, known as forklifts run-in period. Internal combustion forklifts run-in period of work is characterized by: Parts machined surface is rough, poor lubrication, increased wear, rough terrain forklifts easy to loose fasteners, provisions must be run-in period for maintenance and use in accordance with the internal combustion forklifts.
Run-in period of internal combustion forklifts: Start with 50-hour break-in period.
Run-in period, three tons of internal combustion forklifts from the weight must not exceed 600kg, lifting height is generally not higher than 2m. Speed ??of the engine shall be high speed, speed limiting device shall be adjusted or removed, the speed should be maintained at 12km / h or less. In accordance with the proper use of fuel and lubricants. The right to correct start driving and operating the engine warm-up to more than 40 degrees in order to start; started to have a smooth, until the temperature to normal after an upshift; suitable shift, avoid crashing; choose a good road; try to avoid the emergency brake; Use close attention to the process of transmission, drive axle, wheel wheelchair, brake drum temperature; when loading and unloading operations, strictly abide by the rules.