What problems arise when the truck needs an overhaul?

Door frame Akira, a security risk; forklift stability decreased; consumable approach or reach lifetime, such as forklifts appear sound (door frame, drive axle, steering axle, the vehicle interior, etc.) in their work; bad brakes, there are security risks; motor abnormal noise motor bearings need to be replaced; turn bad, there are security risks; forklift operator components gap, shabby appearance; under financial strain can be considered more than the old car's overhaul plan through temporary difficulties.
     What are the benefits overhaul all terrain forklifts?
If a truck has been used for more than five years, and the use of higher frequencies. Due to normal aging forklift electrical parts, the normal wear and tear of the mechanical parts, resulting in the drop in overall forklifts, maintenance costs will increase year by year. Each time the emergency repair can only solve part of the problem or the current. Plus vehicle perennial continuous use, comprehensive status is declining, the vehicle's safety performance must also fall. In this case, the safe use of forklifts must be most concerned about the problem of customers but also the most worried about the overhaul work will be for customers to lift such concerns.
After overhaul benefits can be expressed in the following areas:
1, to improve the overall condition of the truck through the overhaul, increasing the life of the truck, the truck again reduce the frequency of purchase, and reduce costs.
2, by reducing truck overhaul warranty rate, thereby reducing the truck parked time, increase the continuous use time, increasing usage of the forklift, the forklift reduce cost. In addition, it reduces the manager's job.
     3, through the use of a off road rough terrain forklift overhaul to improve safety, ease of use to re forklifts, avoid unnecessary losses from security risks.
     After overhaul of the car, you can extend the life of old 30% -50%. In general, the life of industrial vehicles for five years, and then continue to extend the life of old overhaul put into use, cost control is very beneficial.

Routine maintenance charger need to pay attention

Use a dry cloth or anti-static cloth to wipe clean charger;
Do not use chemical or abrasive cleaners to avoid damage the cabinet;
Must be prevented from being strong shock or click exposed to high temperatures and humid environment;
Use diesel engine parts charger Notes:
Charging confidential exquisite disassemble and decomposition;
Charger is forbidden to disassemble;
Charger should be placed upright, carried out in dry and ventilated environment, avoid moisture, away from flammable materials;
Under the conditions of the battery is full, first disconnect the input AC power, disconnect the connection between the charger and the battery;
Under no conditions or long-term need, you must disconnect the AC power;
Do not cover the process of charging the charging machine, the ambient temperature is not greater than 40 ℃;
This charger is limited to indoor use, to guard against rain;
Prohibited to non-rechargeable battery;
Two boot time interval less than 10 seconds.
Charger should be kept Diesel Rough Terrain Forklift Truck clean to prevent dust and moisture intrusion. When the long-term need, should be placed in the room dry and ventilated place, with the hood closed. After a period of time, should add power to the tide.
Charging process, ventilation louvers on the cabinet can not shelter in order to ensure the heat generated within the charger promptly spread.
Fuses within the input and output circuit after fuse, according to the required specifications necessary for replacement. Fuses can not be too thick, never allow replaced with wires. When the AC input voltage is 110 volts, the input current of 10.8 Ann. When the AC input voltage is 220 volts, the input current of 5.4 Ann. When the two work simultaneously rectifier output current up to 12 A, when a rectifier work alone, the output current is less than 6 Ann. It should use the appropriate fuse according to the input and output current.

Transformer slider brush should be kept in good contact. When exposed copper brush holder portion is less than 2 mm, shall be promptly replaced.

Domestic brands in the Wheel Driving Diesel Forklift technically giants in mature

Quality and price in a reasonable range. Plus extensive distribution network, with the advantages of foreign brands do not have. And because exports frustrated, YTO Rough terrain forklift manufacturers exports dropped significantly, many domestic brands began to pay more attention to the domestic market, efforts to develop the domestic market, but also created its glory in the domestic market. Future development may affect the forklift truck market constraints, still out of the intensity and the way the government macro-control. Government in recent years has been committed to developing high-tech industry and the tertiary industry services, electric forklift truck the overall direction should be no change, but the current revitalization of the economy for the short-term requirements, and has slowed. China's economy there are still many uncertainties, but also has many problems, the economic crisis is not completely over. How short-term growth from investment-led, demand-pull into a long-term growth; how to control the size of credit;rough terrain forklift for sale unhealthy economic structure adjustment, these same places also restricts the development direction and speed forklift industry. Can be said that China's total demand in the past two years the forklift will have relatively high growth, mainly driven by the power comes from the Wheel Driving Diesel Forklift, which is China's global manufacturing plants by the position will not change in the short term due to . Then growth will be eased, and the structure of market demand will gradually change, this change is mainly due to changes in China's industrial structure, light electric warehouse forklift third category will be the second recent growth, with further increasing the cost of land, as well as control of warehouse space, including increased labor costs, the second truck will start to grow rapidly.

High Mast Diesel Forklift Maintenance off road rough terrain forklift

Must adhere to the principle of prevention,All Terrain Forklift maintenance usually will be in the end, rough terrain fork lifts can effectively prevent the occurrence of the problem before forklift truck maintenance. So to maintenance institutionalized, standardized and scientific efforts to improve the efficient use of forklift trucks. Maintenance divided run-in period and maintenance, forklift routine maintenance,

off road forklift trucks

 seasonal maintenance, storage maintenance and regular care and other five. Today with the running of maintenance based.
Forklift new factory or overhauled within the time prescribed running-job use, known as forklifts run-in period. Internal combustion forklifts run-in period of work is characterized by: Parts machined surface is rough, poor lubrication, increased wear,battery operated forklifts easy to loose fasteners, provisions must be run-in period for maintenance and use in accordance with the internal combustion forklifts.
Run-in period of internal combustion forklifts: Start with 50-hour break-in period.
Run-in period, three tons of internal combustion forklifts from the weight must not exceed 600kg, lifting height is generally not higher than 2m. Speed ??of the engine shall be high speed, speed limiting device shall be adjusted or removed, the speed should be maintained at 12km / h or less. In accordance with the proper use of fuel and lubricants. The right to correct start driving and operating the engine warm-up to more than 40 degrees in order to start; started to have a smooth, until the temperature to normal after an upshift; suitable shift, avoid crashing; choose a good road; try to avoid the emergency brake; Use close attention to the process of transmission, drive axle, wheel wheelchair, brake drum temperature; when loading and unloading operations, strictly abide by the rules.

Wheel Driving Diesel Forklift steering angle and steering systems for each component connections

 check the adjustment of the clutch and brake pedal free travel and parking brake lever stroke operation, inspection braking performance brakes, YTO forklift check and adjust V-belt tightness, battery powered forklifts check the battery electrolyte level, density and load voltage, check the engine oil, gear oil, hydraulic oil, coolant fluid levels, check the instruments, lighting, signal , switch button and vehicle accessory equipment operating conditions, check the hydraulic system distribution valve lever travel and work tank trip, check and adjust the tightness of lifting chain, electric forklift truck check the door frame, fork work. Prime mover is the engine of internal combustion forklifts, high engine speed, low torque, and can not be reversed. The forklift when the job requires a lower speed, and to constantly changing direction of travel, wheels also have a large torque, for between the prime mover and a drive wheel, a set of prime mover can reduce speed and increase torque and steering means for converting the drive wheels, called the transmission. Internal combustion forklifts transmission mode is generally divided into three kinds, namely, mechanical, hydraulic and hydrostatic type.

High Mast Diesel Forklift Maintenance off road rough terrain forklift

Must adhere to the principle of prevention,All Terrain Forklift maintenance usually will be in the end,rough terrain trucks can effectively prevent the occurrence of the problem before forklift truck maintenance. So to maintenance institutionalized, standardized and scientific efforts to improve the efficient use of forklift trucks. Maintenance divided run-in period and maintenance, forklift routine maintenance,

battery operated forklifts

 seasonal maintenance, storage maintenance and regular care and other five. Today with the running of maintenance based.
Forklift new factory or overhauled within the time prescribed running-job use, known as forklifts run-in period. Internal combustion forklifts run-in period of work is characterized by: Parts machined surface is rough, poor lubrication, increased wear, rough terrain forklifts easy to loose fasteners, provisions must be run-in period for maintenance and use in accordance with the internal combustion forklifts.
Run-in period of internal combustion forklifts: Start with 50-hour break-in period.
Run-in period, three tons of internal combustion forklifts from the weight must not exceed 600kg, lifting height is generally not higher than 2m. Speed ??of the engine shall be high speed, speed limiting device shall be adjusted or removed, the speed should be maintained at 12km / h or less. In accordance with the proper use of fuel and lubricants. The right to correct start driving and operating the engine warm-up to more than 40 degrees in order to start; started to have a smooth, until the temperature to normal after an upshift; suitable shift, avoid crashing; choose a good road; try to avoid the emergency brake; Use close attention to the process of transmission, drive axle, wheel wheelchair, brake drum temperature; when loading and unloading operations, strictly abide by the rules.

Must adhere to the Wheel Driving Diesel Forklift principle of prevention

All Terrain Forklift maintenance usually will be in the end, can effectively prevent the occurrence of the problem before forklift truck maintenance. So to maintenance institutionalized,YTO Rough terrain forklift manufacturers standardized and scientific efforts to improve the efficient use of forklift trucks. Maintenance divided run-in period and maintenance, forklift routine maintenance,electric forklift truck seasonal maintenance, storage maintenance and regular care and other five. Today with the running of maintenance based.
Forklift new factory or overhauled within the time prescribed running-job use, known as forklifts run-in period. Internal combustion forklifts run-in period of work is characterized by: Parts machined surface is rough, poor lubrication, increased wear, easy to loose fasteners, provisions must be run-in period for maintenance and use in accordance with the internal combustion forklifts.
Run-in period of internal combustion forklifts: Start with 50-hour break-in period.