Do not use chemical or abrasive cleaners to avoid damage the cabinet;
Must be prevented from being strong shock or click exposed to high temperatures and humid environment;
Use diesel engine parts charger Notes:
Charging confidential exquisite disassemble and decomposition;
Charger is forbidden to disassemble;
Charger should be placed upright, carried out in dry and ventilated environment, avoid moisture, away from flammable materials;
Under the conditions of the battery is full, first disconnect the input AC power, disconnect the connection between the charger and the battery;
Under no conditions or long-term need, you must disconnect the AC power;
Do not cover the process of charging the charging machine, the ambient temperature is not greater than 40 ℃;
This charger is limited to indoor use, to guard against rain;
Prohibited to non-rechargeable battery;
Two boot time interval less than 10 seconds.
Charger should be kept Diesel Rough Terrain Forklift Truck clean to prevent dust and moisture intrusion. When the long-term need, should be placed in the room dry and ventilated place, with the hood closed. After a period of time, should add power to the tide.
Charging process, ventilation louvers on the cabinet can not shelter in order to ensure the heat generated within the charger promptly spread.
Fuses within the input and output circuit after fuse, according to the required specifications necessary for replacement. Fuses can not be too thick, never allow replaced with wires. When the AC input voltage is 110 volts, the input current of 10.8 Ann. When the AC input voltage is 220 volts, the input current of 5.4 Ann. When the two work simultaneously rectifier output current up to 12 A, when a rectifier work alone, the output current is less than 6 Ann. It should use the appropriate fuse according to the input and output current.
Transformer slider brush should be kept in good contact. When exposed copper brush holder portion is less than 2 mm, shall be promptly replaced.
没有评论:
发表评论