Replacing the truck tire

Replacement of Lpg Gas Forklift Truck tires
1, the truck parked on a flat, hard reality of the road, turn off the engine, the truck is unloaded.
2, the fork down to the ground, with the parking brake to stop the wheel, such as replacing the drive tires, the jack frame is supported by the front side of the position, such as
Replace the steering tires, the jack at the rear axle rear bracket supporting the center.
3, with a little jacked up truck jack, the tire contact with the ground still; to unscrew bolts inflatable tube, remove the clip, then release wheels
Nut.
4, with full support from the car jack, unscrew the wheel nuts, remove the tire.
5, the installation sequence reverse order of removal. When installing the hub nut tightening torque must reach the required value.
Note: After installation to check whether the tires inflated up to the required value, after a short run for some distance, and then check to see whether all parts bolts
Loose.