High Mast Diesel Forklift Maintenance

Must adhere to the principle of prevention, maintenance usually will be in the end, can effectively prevent the occurrence of the problem before forklift truck maintenance. So to maintenance institutionalized, standardized and scientific efforts to improve the efficient use of forklift trucks. Maintenance divided run-in period and maintenance, forklift routine maintenance, seasonal maintenance, storage maintenance and regular care and other five. Today with the running of maintenance based.
Forklift new factory or overhauled within the time prescribed running-job use, known as forklifts run-in period. Internal combustion forklifts run-in period of work is characterized by: Parts machined surface is rough, poor lubrication, increased wear, easy to loose fasteners, provisions must be run-in period for maintenance and use in accordance with the internal combustion forklifts.
Run-in period of internal combustion forklifts: Start with 50-hour break-in period.
Run-in period, three tons of internal combustion forklifts from the weight must not exceed 600kg, lifting height is generally not higher than 2m. Speed ​​of the engine shall be high speed, speed limiting device shall be adjusted or removed, the speed should be maintained at 12km / h or less. In accordance with the proper use of fuel and lubricants. The right to correct start driving and operating the engine warm-up to more than 40 degrees in order to start; started to have a smooth, until the temperature to normal after an upshift; suitable shift, avoid crashing; choose a good road; try to avoid the emergency brake; Use close attention to the process of transmission, drive axle, wheel wheelchair, brake drum temperature; when loading and unloading operations, strictly abide by the rules.