1, before starting, the driver should first observe and clean up the site, channel, making it suitable for truck driving jobs.
2, start, you should close the emergency switch, open the electric lock, then pull a good direction switch position, whistle, and then slowly and gradually start to accelerate, prohibit fast speed pedal depress the start to prevent starting current is too large to burn bad motor.
3, when traveling, you should gradually accelerate, does not allow for a long time at low speed.
4, Diesel Rough Terrain Forklift Truck driving is prohibited pulled direction switch only after a parked car before flipping the direction switch commutation. Should try to avoid emergency brake in case of emergency, should quickly pull down the knife switch, depress the brake pedal and immediately stop.
5, started to whistle when turning, turning, downhill, uneven pavement or through a narrow passage, to slow down, pay attention to safety.
6, Diesel Rough Terrain Forklift Truck driving on the road, to rely on the right of passage, forklift forks off the ground should be about 100-200mm, door frame in the backward position. When two cars traveling in the same direction, should be kept around more than 2m away.
7, the car will let the driver should empty make heavy vehicles.
8, when the truck towing a trailer, prohibit continuous curve driving, avoid large current discharge and affect safety. Whether unloaded, loaded, uphill, downhill, etc., reversing driving is strictly prohibited. When turning, you should slow down to avoid cargo scattered, keeping in mind the difference between the inner wheel to prevent scratching the inside of the trailer or driving way outside....
没有评论:
发表评论